Policies

Last update:2024-10-28 17:27:37

The Policies page is used to centrally manage all security policies of the website and API. Through the page, you can:

  • Quickly add hostnames that need to be protected;
  • Quickly enable or disable the policies for protected hostnames.
  • Manage all security policies of protected hostnames in a unified manner, including DDoS Protection, WAF, Bot Management, API Security, Threat Intelligence, etc.

Go to Policies

  1. Log in to the CDNetworks Console, find the security product in use under Subscribed Products.
  2. Go to  Security Settings > Policies.

1. Add hostnames that need to be protected

  • Click + Protected Hostnames, follow the prompts to add hostnames. For details, please refer to: Access Guide

2. View Policy Status

墨西哥、多米尼加共和国新节点上线

  • View Policy Status:
    • Protected:If your Cloud Security 2.0 service is still valid and security policies are enabled, the Protection Status of your hostname will be displayed as “Protected”.
    • Not Protected:If your Cloud Security 2.0 service has expired or no security policies have been enabled, the Protection Status of your hostname will change to “Not Protected”.
  • You can check the enabled and not activated security policies.
  • Publishing Status: When modifying the hostname’s configuration, the Publishing Status of the configuration will first be displayed as “Publishing”, and after the configuration takes effect, it will be updated to “Success”.

3. Enable or Disable Policies

You can enable or disable specific security policies according to requirements. Disabled security policies will not take effect, but their configurations will be saved. When you enable the security policy again, the previous configuration will continue to be used. There are two scenarios to enable/disable security policies:

3.1 Enable or Disable the policies for a hostname

  • On the Policies page, find and expand the hostname for which you want to enable or disable the security policy.
  • Click the switch button to enable or disable the security policy, after a second confirmation, the configuration will take effect immediately.
  • You can also disable all policies for a hostname with click 墨西哥、多米尼加共和国新节点上线. After a second confirmation, all security policies for that hostname will be disabled.

3.2 Enable or Disable policies for multiple hostnames at the same time

  • On the Policies page, check the hostnames for which you wish to enable or disable the security policy.
  • Click the Enable or Disable Policies, in the pop-up dialog box, select the policy type you want to change and set its policy status. If there’s no need to change a policy type, please do not check it.
  • Click Confirm to change the specific policy type for the selected hostnames.

4. Copy policies to other hostnames

After enabling Cloud Security 2.0, if you have multiple hostnames that need to use the same configuration, you can use the “Copy policies to other hostnames” feature to copy the security policy configuration of a hostname and apply it to other hostnames. The operation is as follows:

  • On the Policies page, locate the hostname whose configuration you want to copy to other hostnames, and click 墨西哥、多米尼加共和国新节点上线.
  • In the pop-up dialog box, select the policy type you want to copy and choose the target hostname that will receive this security policy configuration.
  • Click Confirm, the selected configuration will replace the existing configuration of the corresponding policy type in the target hostname.

Tips: Before performing the copy operation, make sure you have enabled the corresponding security policy for the target hostname.

5. Reactivate the hostname whose service has expired

Due to reasons such as service expiration, the connected hostname may stop the security protection service and enter the “Not Protected” state. After the service expires, the configuration of this hostname will be deleted after a period of time and removed from the Cloud Security 2.0. If you have renewed before the hostname is removed, you need to reassess whether you need to re-enable security protection for these hostnames. If you need to reactivate security protection, please follow the steps below:

  • On the Policies page, find the hostname you want to re-enable security protection for, and click 墨西哥、多米尼加共和国新节点上线.
  • In the pop-up dialog box, select the security policy you want to enable.
  • Click Confirm, the selected hostname will reactivate security protection and enable your chosen security policy.

Tips: After reactivating the security protection, the configuration will remain consistent with the configuration when it was stopped. However, the managed rules of WAF (when you set the WAF protection mode to automatic mode) and DDoS Managed Rules will update the rule set.

6. Remove hostname from protected hostnams

When a hostname does not need security protection, it can be removed from the Cloud Security 2.0. After removal, the security protection configuration of this hostname will be deleted. If you need to use the security protection function again, please add it again.

  • On the Policies page, find the hostname that needs to be removed from protected hostnames and click 墨西哥、多米尼加共和国新节点上线.
Is the content of this document helpful to you?
Yes
I have suggestion
Submitted successfully! Thank you very much for your feedback, we will continue to strive to do better!