QuerySpecificIPBelong-Documentation

POST

https://api.cdnetworks.com/api/si/tools/ipCheck

Query whether an IP belongs to the CDN provider

단일 사용자 통화 빈도: 300/5min
해당 상품(제품): IP Check

요청 파라미터

Body 파라미터

파라미터 이름	설명
*ipList	IP address, use English comma to separate two items. Every IP address needs to following regular expression rule of ((2[0-4]\\d\|25[0-5]\|1\\d\\d\|0\|[1-9]\\d?)\\.){3}(2[0-4]\\d\|25[0-5]\|1\\d\\d\|0\|[1-9]\\d?). The default number of IPs cannot exceed 20 (you can contact technical support to adjust) .

응답 파라미터

Body 파라미터

파라미터 이름	설명
- checkListList	checkList
responseString	yes: the IP belongs to Our system, no: the IP does not belong to Our system
ipString	IP addresses

에러 코드

에러 코드(code)	설명(message)	HTTP 상태 코드	설명
INVALID_HTTP_REQUEST	There was an error in the body of your HTTP request.	400	IP has not been specified
PARAM_TOO_LONG	Param length too long.	400	Number of queried IP exceeds 20
PARSE_PARAM_ERROR	parse param error	400	IP does not conform to regular expression rules
SYSTEM_ERROR	We encountered an system error. Please try again.	500	System error

예제

JSON

요청 예제 복사 복사 완료#!/bin/bash # Please remember to change the param (-H "X-Time-Zone") in this demo to the TimeZone you want in response username='example_username' apiKey='example_apiKey' date=`env LANG="en_US.UTF-8" date -u "+%a, %d %b %Y %H:%M:%S GMT"` password=`echo -en "$date" | openssl dgst -sha1 -hmac $apiKey -binary | openssl enc -base64` curl -i --url "https://api.cdnetworks.com/api/si/tools/ipCheck" \ -X "POST" \ -H "X-Time-Zone:GMT+08:00" \ -u "$username:$password" \ -H "Date: $date" \ -H "Accept: application/json" \ -d '{ "ip":["1.1.1.1","2.2.2.2"] }'

#!/bin/bash
# Please remember to change the param (-H "X-Time-Zone") in this demo to the TimeZone you want in response

  username='example_username'
  apiKey='example_apiKey'
  date=`env LANG="en_US.UTF-8" date -u "+%a, %d %b %Y %H:%M:%S   GMT"`
  password=`echo -en "$date" | openssl dgst -sha1 -hmac $apiKey   -binary | openssl enc -base64`
  curl -i --url   "https://api.cdnetworks.com/api/si/tools/ipCheck"   \
  -X "POST" \
-H "X-Time-Zone:GMT+08:00" \
  -u "$username:$password" \
  -H "Date: $date" \
  -H "Accept: application/json" \
 -d '{
      "ip":["1.1.1.1","2.2.2.2"]
  }'

응답 예제 복사 복사 완료{ "result": { "checkList": [ { "response": "no", "ip": "1.1.1.1" }, { "response": "no", "ip": "2.2.2.2" } ] }, "code": 200 }

{
      "result": {
          "checkList": [
              {
                  "response":   "no",
                  "ip":   "1.1.1.1"
              },
              {
                  "response":   "no",
                  "ip":   "2.2.2.2"
              }
          ]
      },
      "code": 200
  }

이 문서의 내용이 도움이 되었습니까?

예

아니오

QuerySpecificIPBelong

요청 파라미터

Body 파라미터

응답 파라미터

Body 파라미터

에러 코드

예제

디렉토리